ONCE Care Kit 1+1 28.5г

General Instructions: Please read the coffee oil cleaning procedure in the relevant sections of the coffee machine manufacturer's manuals. Ensure that the system is flushed with clean water after the cleaning cycle is complete. Special instructions for using coffee machines are provided in the relevant sections of the manufacturer's operating manuals.

Instructions for Coffee Cleaner Coffee Oil Removal Tablets

How to Clean (Automatic Coffee Machine) Suitable for machines with an automatic cleaning program. Turn on the coffee machine. Open the door and remove the brewing unit (if the model allows). Rinse the unit under running water and insert it back. Start the "Clean/Cleaning/Clean machine" program. When prompted on the display, place 1 tablet into the ground coffee compartment. Press "Start". Wait until the cycle is fully completed. After completion, perform 2–3 rinse cycles (press the coffee preparation button without adding coffee). Standard frequency: once every 200–300 cups or once every 2–4 weeks.

Manual Cleaning (when there is no program) For simpler automatic, espresso/portafilter, and drip coffee makers.

Automatic coffee machine without a program Remove the brewing unit. Dissolve 1 tablet in a glass of hot water. Submerge the brewing unit in the solution and leave for 15–20 minutes. Rinse thoroughly with clean water. Reinsert the unit. Run 2–3 hot water dispensing cycles to rinse the system.

Espresso / Portafilter coffee machine Place a blind filter (blind basket) into the portafilter. Place ½–1 tablet inside it. Install the portafilter and run the brewing process for 10–15 seconds. Turn it off and let it sit for 1 minute. Repeat 4–5 times. Remove the portafilter, rinse it, and perform 2–3 flush cycles without coffee.

Drip coffee maker Dissolve 1 tablet in hot water inside the carafe. Pass it through the system like regular water. Then run 2 carafes of clean water through the machine.

Instructions for Decalcinate Descaling Agent

Instructions depend on your coffee machine model and manufacturer. Before starting, review the descaling process in the manufacturer's manual.

Instructions for coffee machines without an automatic descaling program: Pour 20–40 g into the water tank, fill the tank with water, and stir well. Turn on the appliance and run 2 cups of water through the steam wand (each cup volume — 150 ml). Turn off the appliance power button. Leave the descaling solution for 15–20 minutes. Repeat steps 2 and 3 at 3-minute intervals until no descaling solution remains in the water tank. Rinse the water tank with clean water and fill it again. Rinse the machine parts by running about 1 liter of water through the steam/hot water wand. Run 1 liter of water through the coffee outlet spout (if possible). If not possible, make 3 cups of coffee and discard them. Remove the brewing group (automatic machines only) and rinse it with clean water.

Instructions for household appliances: General recommendation: for correct product use across various devices, always refer to your appliance manufacturer's full manual. For kettles: mix 20 g of product per 1 liter of water, bring the solution to a boil, leave for a short time, drain the solution, and rinse the kettle with clean water. For boilers: pour the solution into the tank following the recommended concentration in the boiler manual, leave for a certain period to dissolve scale, drain it, and rinse the device with clean water. For irons: mix 20 g of product per 1 liter of water, fill the iron reservoir with the solution, turn on the iron, activate the steam function, drain the remnants after cleaning, and rinse the reservoir with clean water. For washing machines: add the product to the drum according to the concentration recommended in your washing machine manual, run a high-temperature wash cycle without laundry, and then perform a rinse cycle.